Different types of agitators can be installed for the tanks, depending on the application: E.g. anchor agitators, propeller agitators, dispersing mixers, agitators with wipers, etc. We purchase the agitators from the leading manufacturers for agitators and build them into the tanks according to customer requirements.
Construction
Insulation: 50 mm mineral wool lined on both sides, outer container jacket is airtightly welded. Heating: Dimple Jacket -3 bar Max. Cleaning nozzle: 2 pieces DN 25 with spray ball DN 25 (spray radius 360 °) Both in the upper cover.
Inlet unions: 1 piece DN 50 in the upper cover
Outlet unions: 1 piece of DN 65 in the lower floor
Level measurement: over level transmitter / limit switch
Heater unions: 8 pieces à 2 "for 4 separate heating circuits
The cooking container stands on 4 feet with foot culottes 1 "with base plate. The temperature is measured on the ground via a Pt100. All four heating and cooling zones can be operated separately.
Agitator: FGR ®-60 Si/A
Container pressure: atmospheric
engine performance 7,5 KW
Protection class IP 55, insulation class F
Engine variants temperature sensor (3x155°C), food-compatible oil according to UHSD1
Drive with offset geared motor with hollow shaft
Agitator installation: centric from above
Agitator speed 21rpm.
Agitator shaft free-flying
Mounting flange with rotary shaft seal W. St. 1.4435 sealing NBR
Agitator shaft: rpm. 60 mm
Agitator shaft: 2.400 mm
Element: Anchor 1x 2 sheets with additional window and wall and floor wiper
PTFE wipers in PTFE / FDA material. 25% glass fiber
Product contact in W. St. 1.4435, surface ground (Ra 1,4μm)
When the machine is turned to the right, away from the floor and away from the wall. For assembly, the container cover and agitator can be removed. The cover can be folded on both sides. From one side with protection (grid)
Specifications
Type | Tank with agitator |
Cylindrical diameter | ~ 1.700 mm |
Height | ~ 2.800 mm |
Outlet heigh | ~ 500 mm |
Cylindrical height | ~ 2.000 mm |
Material thickness | Inner container: 5.0 mm Outer container jacket: 3.0 mm |
Material | Product contacting: W. St. 1.4571 otherwise 1.4301 |
New sugaring line for Fazer Finnland
Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...
Read More...