The drum washing machine is very well suited for the cleaning of various types of vegetables and can be produced in various designs:
- with sheet metal profiles "smooth"
- with gumbread profiles "Perfect for cucumbers"
- or with brush inserts
In addition, an opposing rotating brush can be installed in the drum washing machine, which further improves the cleaning process and increases the quality.
Construction
The cucumbers fall over the inlet slide into the 1st drum washing machine and are washed with circulating water. The dripping water is filtered through a submerged tub with drum screen and wiper from coarse dirt and returned back to the cleaning process.
The second drum washing machine is cleaned again and a final cleaning is carried out with fresh water. Both drums can be adjusted in rotation speed.
The drums have a counter-rotating brush roller which increases the cleaning effect and also removes stubborn dirt.
Each drum has two running rings, which run on massive rollers. In the drum are special stainless steel profiles with screwed-on brush profiles.
Drive over 2 running axles across the pulleys through gears with a chain and chain tensioner.
All rotating parts are covered by protective plates. The drums are open at the top.
Specifications
Type | TW1200 |
Performance |
Dimensions
Total length | ~ 4.450 mm |
Total width | ~ 2.050 mm |
Total height | ~ 2.500 mm |
Insertion height 1st drum washing machine | ~ 2.300 mm |
Ejection height after the 2nd drum washing machine | ~ 1.000 mm |
Drives
Drum | SEW geared motor, 1.5 kW, IP 65 with frequency converter |
Brush | SEW geared motor, 0.75 kW, IP 65 with frequency converter |
Material strengths and qualities
Pasteurizers for Meiko
Company Meiko has received 2 new pasteurizers from ten Brink. 1 piece with a length of 30 meters...
Read More...