The linear infusion system is built in two versions:
- Easy overflowing system with collecting basin, filter system, On request with heating, with pump
- A linear pouring unit with overflow conveyor to avoid.
Construction
Underneath the band is a collecting tank and a bucket attached, half-sided with 2 pieces of pushing. The other side is covered with a loose cover.
Above the conveyor belt is an infusion channel, with a centrally extending row of holes. Furthermore, a driven plastic module strip is applied as a cover strip.
The entire upper part, the link belt and the infusion channel can be height-adjusted by approx. 200 mm using 2 spindles with handwheels.
Specifications
Type | |
Performance | Up to 180 containers / min. |
Container size | From Ø 40 to Ø 200 mm Height up to 240 mm |
Dimensions
Total length | ~ 3.600 mm |
Total width | ~ 850 mm |
Total height | ~ 1.590 mm |
Total height | 900 mm ± 50 mm |
Drives
recirculation | Stainless steel pump 6 m³ / h at 0,4 bar with throttle valve |
Conveyor belt & plastic module tape | each 1 SEW gearbox with FI driven by engine power 0,25 kW |
Material strengths and qualities
Belt construction | stainless steel sheet profiles |
Conveyor belt | CNS plate tape chain W.St. Nr. 1.4301 |
lateral guiding | EVA-square tube |
Pasteurizers for Meiko
Company Meiko has received 2 new pasteurizers from ten Brink. 1 piece with a length of 30 meters...
Read More...