User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

The tanks can be produced in a variety of sizes up to 30,000 liters. - horizontal version - standing version - as round tanks or square tank - with conical bottom - with dished bottom

Construction

Tank shape: Cylindrical tank with conical cover bottom and conical outlet floor including so-called bottom sump.

Surface as required e.g. Roll blank or sanded, welded seams pickled, passivated or sanded.

Specifications

Type Storage tank
Useful content up to 30,000 liters
Cylindrical diameter up to 2,000 mm
Height up to 10,000 mm
Cylindrical height up to 8,000 mm
Material thickness up to 6.0 mm
Material Stainless steel 1.4301 or 1. 4571

Connections as required e.g.

Manhole DN 600 in the bottom of the cover
Manhole DN 500 in the cylinder (mounting opening)
Venting nozzle DN 80
Supply line DN 50 manual stop valve (ball valve) on-site supply
Level guidance mit pressure load cell, a ½“ e.g. Fabr. Negele
Cleaning line (in ground sump) DN 80 with manual stop valve (ball valve)


New sugaring line for Fazer Finnland

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

Different types of agitators can be installed for the tanks, depending on the application: E.g. anchor agitators, propeller agitators, dispersing mixers, agitators with wipers, etc. We purchase the agitators from the leading manufacturers for agitators and build them into the tanks according to customer requirements.

Construction

Insulation: 50 mm mineral wool lined on both sides, outer container jacket is airtightly welded. Heating: Dimple Jacket -3 bar Max. Cleaning nozzle: 2 pieces DN 25 with spray ball DN 25 (spray radius 360 °) Both in the upper cover.

Inlet unions: 1 piece DN 50 in the upper cover Outlet unions: 1 piece of DN 65 in the lower floor
Level measurement: over level transmitter / limit switch
Heater unions: 8 pieces à 2 "for 4 separate heating circuits


The cooking container stands on 4 feet with foot culottes 1 "with base plate. The temperature is measured on the ground via a Pt100. All four heating and cooling zones can be operated separately.

Agitator: FGR ®-60 Si/A
Container pressure: atmospheric
engine performance 7,5 KW
Protection class IP 55, insulation class F
Engine variants temperature sensor (3x155°C), food-compatible oil according to UHSD1
Drive with offset geared motor with hollow shaft
Agitator installation: centric from above
Agitator speed 21rpm.
Agitator shaft free-flying
Mounting flange with rotary shaft seal W. St. 1.4435 sealing NBR
Agitator shaft: rpm. 60 mm
Agitator shaft: 2.400 mm
Element: Anchor 1x 2 sheets with additional window and wall and floor wiper
PTFE wipers in PTFE / FDA material. 25% glass fiber
Product contact in W. St. 1.4435, surface ground (Ra 1,4μm)

When the machine is turned to the right, away from the floor and away from the wall. For assembly, the container cover and agitator can be removed. The cover can be folded on both sides. From one side with protection (grid)

Specifications

Type Tank with agitator
Cylindrical diameter ~ 1.700 mm
Height ~ 2.800 mm
Outlet heigh ~ 500 mm
Cylindrical height ~ 2.000 mm
Material thickness Inner container: 5.0 mm
Outer container jacket: 3.0 mm
Material Product contacting: W. St. 1.4571 otherwise 1.4301


New sugaring line for Fazer Finnland

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

The tanks can be heated as desired in a variety of ways: thermostats, half-pipe coils, double-walled by hot water or steam.

Construction

Insulation: 50 mm mineral wool lined on both sides, outer container jacket is airtightly welded. Heating: Dimple Jacket -3 bar Max. Cleaning nozzle: 2 pieces DN 25 with spray ball DN 25 (spray radius 360 °) Both in the upper cover.

Supply connection: 1 piece DN 50 in the upper cover
Outlet: 1 piece of DN 65 in the lower floor
Level measurement: over level transmitter / limit switch
Heating sockets: 8 pieces à 2 "for 4 separate heating circuits


The cooking container stands on 4 feet with foot calottes 1 "with base plate. The temperature is measured on the ground via a Pt100. All 4 heating and cooling zones can be operated separately.

Agitator: FGR ®-60 Si/A
Container pressure: atmospheric
Engine power 7,5 KW
Protection class IP 55, insulation class F
Engine model, temperature sensor (3x155 ° C), food-compatible oil according to UHSD1
Drive with flat shaft motor with hollow shaft
Agitator installation: centric from above
Agitator speed 21 rpm
Agitator shaft free-flying
Mounting flange with radial shaft seal W. St. 1.4435 Sealing NBR/> Agitator shaft rpm. D 60 mm
Stirrer shaft length: 2.400 mm
Element: Anchor 1x 2 sheets with additional window and wall and base wiper
PTFE wipers in material PTFE / FDA material. 25% glass fiber
Product contact in W. St. 1.4435, surface sanded (Ra 1,4μm)

When the machine is turned clockwise, away from the floor and the wall. For assembly, the container cover and agitator can be removed. The cover can be folded on both sides. From one side with protection (grid)

Specifications

Type Tank with heating
Cylindrical diameter ~ 1.700 mm
Height ~ 2.800 mm
Outlet height ~ 500 mm
Cylindrical height ~ 2.000 mm
Material thickness Inner container: 5.0 mm
Outer container jacket: 3.0 mm
Material Product contacting: W. St. 1.4571 otherwise 1.4301


New sugaring line for Fazer Finnland

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...
Talk to us.

We will be pleased to answer your questions and present our solutions and equipment in a short presentation. Please let us know how you would like to be contacted. We will get back to you as soon as possible.

About ten Brink

Ten Brink stands for innovation and flexibility - long-life, extremely low-maintenance constructions of the highest quality. We give our customers a satisfaction guarantee.


Latest News

Contact

  • Otto-Kraus-Straße 4,
    DE 90411 Nuremberg
  • +49 911 522 088
    Mo-Fr, 8 Uhr bis 17 Uhr
  • sales@tenbrinkec.de
    We will answer shortly