After treatment

After treatment

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active
  • Gravimetrische Dosieranlagen für Trolli
  • Gravimetrische Dosieranlagen für Trolli
  • Gravimetrische Dosieranlagen für Trolli

Fruchtsäfte schonend Erhitzen und Abfüllen in Flaschen oder Bag-in-Box!

  • Edelstahl Rohrwärmetauscher für schnelle und schonende Safterwärmung im Wasserbad
  • Lieferbar mit 1 (Heizleistung 9kW) oder 2 Flaschenfüllventilen (Heizleistung 18kW)
  • Selbständiger Abfüllbeginn beim Einschieben und Füllstop bei voller Flasche
  • Füllhöhe, Flaschendurchmesser und Flaschenhöhe einfach einstellbar
  • Wechsel auf optional erhältliche Bag-in-Box Abfüllvorrichtung mit wenigen Handgriffen
  • Elektronische Temperaturregelung des Wasserbades
  • Regelbare Saftaustrittstemperatur und Anzeige mit Digitalthermometer
  • Trockengehschutz durch Schwimmerschalter im Wasserbad
  • Komplett aus Edelstahl gefertigt

Bag in Box

Mit der Bag-In-Box-Abfüllvorrichtung können Sie den Heißabfüller mit wenigen Handgriffen zur Bag-Abfüllung umrüsten. Zum Abfüllen wird die Mündung des Bag-In-Box-Beutels mit einer Halteklaue fixiert. Eine Verschließvorrichtung erleichtert das Einpressen des Verschlusses.

  • Vorwärmereinheit für den Saftvorratsbehälter aus Edelstahl Wellrohr
  • An jede Heizanlage mit Warmwasserbereitung anschließbar
  • Steigerung der Förderleistung durch Saftvorerwärmung von 50-60°C
  • Auf dem Kopf stehend sehr leicht zu reinigen

Technische Daten

THA 100-9 THA 100-18
Elektrischer Anschluss 400VAC / 9kW / 16A 400VAC / 18kW / 32A
Maße (DxH) [mm] 440x1580 440x1580
Gewicht [kg] 41 43
Füllventile 1 2 / Bag-in-Box
Leistung bis zu [l/h] 130 200
Wasservorratsbehälter [l] 100 100
Saftvorratsbehälter [l] 65 65


New sugaring line for Fazer Finnland

New sugaring line for Fazer Finnland

2017-06-08 /
0 Comment
/
Sweets Processing

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...

After treatment

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active
  • Öltrommeln - ten Brink Anlagen Süßwaren Verarbeitung
  • Öltrommeln - ten Brink Anlagen Süßwaren Verarbeitung
  • Öltrommeln - ten Brink Anlagen Süßwaren Verarbeitung

The oil drum is used for oiling confectionery such as gummy bears and foam products. The products are fed via a conveyor belt (optional) via a shute into the oiling drum. In the oil drum, the oiling of the products takes place. For this purpose, we use a special oil pump to feed in the amounts of oil dispersed in the drum depending on the formulation. The products rub in the drum with the oil reciprocally and get the shiny effect. On the outlet side, the drum has a special phase ring which allows only certain amounts to be applied to a subsequent belt after oiling. The drum is easily accessible from all sides, which makes maintenance and cleaning work easier.

Construction

Frame of 4-edge pipe with calotte feet and panels. The drum is mounted on two shafts with four rubberized rollers and is driven by a geared motor with a frequency converter. Incl. 4 feet height adjustable.

The drum is completely made of stamped sheet metal with U-profile running rings.In the drum there are so-called entrainers which are incorporated into the drum and form a hygienically clean inner surface. The ejection area is equipped with eight spiral-shaped ejectors and ejection hoppers made of 6-WL sheet metal.

Specifications

Type Oiling drum type OT1400
Length ~ 2.920 mm
Width ~ 2.200 mm
Height ~ 2.575 mm
Drum diameter ~ 1.400 mm
Drum length ~ 2.100/2.230 mm
Outlet diameter ~ 1.420 mm
Insertion height ~ 1.790 mm
Ejection height ~ 800 mm
Material Stainless steel W. St. Nr. 1.4301


New sugaring line for Fazer Finnland

New sugaring line for Fazer Finnland

2017-06-08 /
0 Comment
/
Sweets Processing

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...

After treatment
Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
  • Zuckertrommeln - ten Brink Anlagen Süßwaren Verarbeitung
  • Zuckertrommeln - ten Brink Anlagen Süßwaren Verarbeitung
  • Zuckertrommeln - ten Brink Anlagen Süßwaren Verarbeitung

The further developed sugar drum from ten Brink is another milestone in the production of confectionery. The drum is designed in a hygienic design and offers optimal conditions for cleaning and conveying the sugar. The drum can be opened from all sides and is easily accessible during assembly / maintenance. An overflow funnel with a vacuum system serves the sugar drum as a dosage in the process. A special valve is then added to the drum so that the product is evenly wetted from all sides with sugar. A screw fed into the drum feeds the sugar over and over again and forms a sugar curtain at the inlet.

Construction

The frame consists of 4-edged pipe with four feet height-adjustable and drive motor which is frequency-controlled. The cover is rotatable, connected to the base frame by hinges. The drive of the drum is transmitted with the frequency converter through three V-belts. On the inlet side, a baffle plate is installed for the sugar pre-hand. at the delivery end a discharge funnel 6 WL-sheet. The drum consists of an outer jacket with an inner drum which runs conically in the running direction, it consists of perforated sheet metal in the ejection area, approximately 500 mm from the total length. In the interstice is a six-start conveyor screw, which is equipped with blades in the disposal area of ​​the drum, for the sugar back transport. For turning the product, six angle plates are welded onto the inner drum. Above the drum is the buffer dosing funnel on which the vacuum conveyor is mounted.

Specifications

Type Sugar-coating drum Type ZT1000
Length ~ 2.800 mm
Width ~ 1.480 mm
Height ~ 2.700 mm
Drum diameter Ø ~ 1.000 mm
Drum length ~ 2.000 mm
Insertion height ~ 1.100 mm
Ejection height ~ 400 mm
Outlet diameter ~ 800 mm
Material stainless steel W. St. Nr. 1.4301


New sugaring line for Fazer Finnland

New sugaring line for Fazer Finnland

2017-06-08 /
0 Comment
/
Sweets Processing

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...

After treatment

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active
  • Bedampfungsbänder - ten Brink Anlagen Süßwaren Verarbeitung
  • Bedampfungsbänder - ten Brink Anlagen Süßwaren Verarbeitung
  • Bedampfungsbänder - ten Brink Anlagen Süßwaren Verarbeitung

The further developed steam band from ten Brink is a milestone in the after-treatment and particularly efficient in the preparation for the sugar-coating. The article is steamed in order to prepare the surface for the subsequent sugar-coating but not to injure it. This requires a high-precision steam control system and we offer this in the package to our customer..

Construction

Belt construction from 4 edge and edged metal. Conveyor belt made of wire mesh with side straps and stainless steel drive wheels. Plastic slide rails (PTFE, FDA quality) placed under the pull tabs. Side guide mounted on hinged lid. Throwing roller made of plastic, longitudinally milled. Vaporization by flat jet nozzles above (12 pieces) and bottom (21 pieces). Outlet side suction DN 200 with integrated pusher plate for aerating, Jacob tube connection, air shut-off valve, two-foot pairs with culottes. Drip tray with slope and drain.

Specifications

Type Evaporation band type BBG500
Length ~ 3.100 mm
Width ~ 1.080 mm
Height ~ 1.800 mm
Band length ~ 2.920 mm
Band width ~ 650 mm
Useful width ~ 500 mm
Working height ~ 1.350 mm
Band speed ~ 65 m/min.td>
Throw roll speed ~ 1.750 Upm
Material Stainless steel W. St. Nr. 1.4301
Drives geared Motor for belt and three-phase motor for the throw roll. Both with frequency converters for control


New sugaring line for Fazer Finnland

New sugaring line for Fazer Finnland

2017-06-08 /
0 Comment
/
Sweets Processing

Company Fazer in Finland has received a new after-treatment line (processing of confectionery) The scope of delivery included...

Read More...
Talk to us.

We will be pleased to answer your questions and present our solutions and equipment in a short presentation. Please let us know how you would like to be contacted. We will get back to you as soon as possible.

About ten Brink

Ten Brink stands for innovation and flexibility - long-life, extremely low-maintenance constructions of the highest quality. We give our customers a satisfaction guarantee.


Latest News

Contact

  • Otto-Kraus-Straße 4,
    DE 90411 Nuremberg
  • +49 911 522 088
    Mo-Fr, 8 Uhr bis 17 Uhr
  • sales@tenbrinkec.de
    We will answer shortly