User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

Fruchtsäfte schonend Erhitzen und Abfüllen in Flaschen oder Bag-in-Box!

  • Edelstahl Rohrwärmetauscher für schnelle und schonende Safterwärmung im Wasserbad
  • Lieferbar mit 1 (Heizleistung 9kW) oder 2 Flaschenfüllventilen (Heizleistung 18kW)
  • Selbständiger Abfüllbeginn beim Einschieben und Füllstop bei voller Flasche
  • Füllhöhe, Flaschendurchmesser und Flaschenhöhe einfach einstellbar
  • Wechsel auf optional erhältliche Bag-in-Box Abfüllvorrichtung mit wenigen Handgriffen
  • Elektronische Temperaturregelung des Wasserbades
  • Regelbare Saftaustrittstemperatur und Anzeige mit Digitalthermometer
  • Trockengehschutz durch Schwimmerschalter im Wasserbad
  • Komplett aus Edelstahl gefertigt

Bag in Box

Mit der Bag-In-Box-Abfüllvorrichtung können Sie den Heißabfüller mit wenigen Handgriffen zur Bag-Abfüllung umrüsten. Zum Abfüllen wird die Mündung des Bag-In-Box-Beutels mit einer Halteklaue fixiert. Eine Verschließvorrichtung erleichtert das Einpressen des Verschlusses.

  • Vorwärmereinheit für den Saftvorratsbehälter aus Edelstahl Wellrohr
  • An jede Heizanlage mit Warmwasserbereitung anschließbar
  • Steigerung der Förderleistung durch Saftvorerwärmung von 50-60°C
  • Auf dem Kopf stehend sehr leicht zu reinigen

Technische Daten

THA 100-9 THA 100-18
Elektrischer Anschluss 400VAC / 9kW / 16A 400VAC / 18kW / 32A
Maße (DxH) [mm] 440x1580 440x1580
Gewicht [kg] 41 43
Füllventile 1 2 / Bag-in-Box
Leistung bis zu [l/h] 130 200
Wasservorratsbehälter [l] 100 100
Saftvorratsbehälter [l] 65 65


Pasteurizers for Meiko

Company Meiko has received 2 new pasteurizers from ten Brink. 1 piece with a length of 30 meters...

Read More...

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

The post-packing lines allow for high-performance in the area of industrial filling, while maintaining the quality and the filling weight. The raw material is partially screened manually and by hand, underweight glasses / cans are refilled.

Construction

Glasses with an underweight which were ejected after the belt scale run on a parallel running curve to therepacking belt. Before the inlet of the repacking belt,, the glasses are separated on 2 lanes and slowed down to manual reloading. The glasses are then rejoined and returned to the line.

Stainless steel construction. Distribution and distribution starter on two lanes, spout with roller side guide for singling.

Specifications

Type repacking belt
Performance

Dimensions

Length A-A ~ 4.000 mm
Band width ~ 400 mm
Working height 850 ± 50 mm

Conveyor

3- lane, plate tape (3x150 mm)

Drives

2 SEW Geared motors with FU

Material strengths and qualities

Product contacting parts made of stainless steel V4a 1.4571, otherwise V2a 1.4301


Pasteurizers for Meiko

Company Meiko has received 2 new pasteurizers from ten Brink. 1 piece with a length of 30 meters...

Read More...

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive

The ten Brink HLF (high-performance filler) has been a name in the national and international market for over 40 years. These fillers are leading in the filling of piece goods in glasses or cans.

Due to the vibration of the individual components of the entire system, the good / product is filled into the glass in the correct quantity.

The raw material control as well as the glass feed and intensity can be controlled and operated by a manual control panel, which hovers above the plant. This is the only way to achieve a 100% clean filling level.

Construction

The product is fed onto a vibrating distributor channel and fed uniformly over the entire width to the filler plate. By means of a deflector, the filling quantity / dosage of raw material can be controlled to the repacking belt in the corresponding filling area.

The filling quantity can be determined by vibration on the filling plate. The product is fed to the glass mouth via an adjustable inlet curve. The glasses are held via a non-positive transport system, which also has a vibration device, and thus a higher degree of filling is achieved.

Excess product is fed to an elevator by means of an underfloor conveyor and then returned to the filling sheet via the distributor channel.

In case of a glass breakage, the sub-assembly conveyor can be moved in its direction and thus promotes the breaking of a discharge chute.

The setting of the corresponding glass sizes is infinitely variable. A blow-off device is installed on the outlet side of the product for loosely lying on the glass mouth.

The electric control unit is installed in a CNS control cabinet and a swiveling CNS control panel.

Specifications

Type HLF
Performance ~ 12,000 glasses / hour

Dimensions

Total length ~ 4.500 mm
Total width ~ 2.700 mm
Total height ~ 2.400 mm
Height product task ~ 1.850 mm
Height of inlet of glasses ~ 970 mm

Drives

Inlet and distribution channel 2 vibration drives à 0,35 kW
Drive fill sheet 2 vibration drives à 0,53 kW
Glass transport Vibration drives at 0.30 kW
2 variable speed geared motor 0.75 kW
2 geared motor 0.18 kW
Product return 1 Geared motor 0,37 kW
Elevator 1 Geared motor 0,37 kW

Material strengths and qualities

Compl. 1.4301/1.4541, chains, chain wheels and drives in standard steel


Pasteurizers for Meiko

Company Meiko has received 2 new pasteurizers from ten Brink. 1 piece with a length of 30 meters...

Read More...
Talk to us.

We will be pleased to answer your questions and present our solutions and equipment in a short presentation. Please let us know how you would like to be contacted. We will get back to you as soon as possible.

About ten Brink

Ten Brink stands for innovation and flexibility - long-life, extremely low-maintenance constructions of the highest quality. We give our customers a satisfaction guarantee.


Latest News

Contact

  • Otto-Kraus-Straße 4,
    DE 90411 Nuremberg
  • +49 911 522 088
    Mo-Fr, 8 Uhr bis 17 Uhr
  • sales@tenbrinkec.de
    We will answer shortly